Industrialise your Raspberry Pi

10.1” PCAP Touch Screen Solution

Developed to work with the Raspberry Pi 3

Unleash the potential of the Raspberry Pi with our pre-assembled display kit, turning the Raspberry Pi into a complete system with a 10.1” Projective Capacitive touch screen.

The Raspberry Pi is simply mounted onto the rear of the interface PCB using the supplied pillars and screws. The display can be either panel or flush mounted and provides a resolution up to WXGA.


The potential uses are limitless and encompass a very wide range of applications eg industrial automation, medical devices, home technology, IoT products, communication systems etc.



  • Wide view angle IPS TFT display
  • Multi-touch input PCAP touch screen
  • Connects direct to Raspberry Pi
  • Easy Integration for panel or flush mount
  • WXGA Resolution


  • 10.1″ Diagonal TFT Display
  • Wide View Angle IPS Display (85/85/85/85)
  • Screen Dimensions: 255mm x 174mm x 9mm (incl Touch Panel)
  • Screen View Area: 218mm x 137mm
  • Resolution: 1280 x 800 Pixels
  • Up to 5 Finger Capacitive Touch
  • Connects direct to the Raspberry Pi Via the HDMI port
  • Touch connects via USB or I2C
  • 5V and 12V power

Included in Kit as Standard

  • 10.1″ Touch Screen Display & HDMI to LVDS interface PCB (pre-assembled)
  • HDMI to HDMI interface cable
  • Micro USB to USB interface cable
  • 4xM2.5 Screws & Pillars to mount Raspberry Pi 3

Optional Extras

  • Raspberry Pi 3
  • 16GB Micro SD Card
  • 5V and 12V power supply
  • 2 x jumper wires for internal power
  • I2C cable

Raspberry Pi is a Trademark of the Raspberry Pi Foundation


PHP Code Snippets Powered By :